RTE 67-74 Tach kit
From RTE
Home->RTE A Body Parts
Home->RTE B Body Parts
Home->RTE E Body Parts
Home->RTE_AMX_Parts
Home->RTE_Truck_Parts
1967-1974 Mopar tachometer Repair Kit
Cost $75 plus $10 shipping & handling in US
Detailed information
Your original 1967-74 Mopar tachometer has a paper printed circuit board inside it. The original printed circuit board is by now around 35 years old, and many of the electronic components on the board are likely to have degraded over time. The new fiberglass printed circuit board that comes in our kit uses modern integrated circuits that are more reliable and accurate than the original parts. The original circuit board has an adjusting potentiometer that is open to the enviroment, and these pots get noisy and corroded over time. The new circuit board has high quality 15 turn adjustment potentiometers that are sealed from the enviroment, so they should last many years with no problem.Mopar used the same board for all the tachometers in their cars from 1967 to 1974, so this tachometer kit is the one you need for any car from 1967 to 1974. It is also used in the earlier truck tachometers.
Once the tach is removed from the car, it takes about 30 minutes to install the tach board. Since each tachometer meter movement is slightly different, we suggest that you calibrate the tach board using another RPM gauge so that you will have an extremely accurate tachometer. For more information on the installation, see the following links:
- Tach Kit Faq
- 67-74 Tachometer Installation Manual
- Mopar Action Tachometer Kit Article
- Mopar Collectors Guide Article
Tach Kit Contents: Tach board, detailed printed installation instructions,
PLUS a printed copy of the April 2005 Mopar Action article showing the step-by-step installation of the tach kit.
Also do not forget to order your Calibrator/Exerciser kit to go along with your tach. This way you will be able to calibrate your new tach or to exerise the needle.
RTE Installation
If you are uncomfortable installing the tach kit yourself, we will install it for you for $25 plus return shipping ($15 for insured shipping inside the U.S.) we will install and calibrate the circuit board for you. Send the Tachometer and the Tachometer sending unit insured to:
Real Time Engineering
19352 Hilton Road
Springdale AR, 72764
1-479-756-2757
